| 1. Remove a weight wire from the accumulator. |
| 2. Weaken collars and take an air inlet tube from rubber fastenings on a cover of a head of the block of cylinders. Disconnect the electric socket from the sensor of temperature coming to the air engine (see rice. An arrangement of rubber fastenings of a tube of an air inlet to a head of the block of cylinders). |
| 3. Remove fuel nozzles and the fuel highway. |
| 4. Mark and disconnect all vacuum hoses from an inlet collector. |
| 5. Take a plait of wires from fastening brackets on an inlet collector. |
| 6. Take the probe for measurement of level of engine oil, then unscrew a probe pipe for measurement of level of oil from an inlet collector (see rice. Elements of fastening of an inlet collector). |
| 7. Gradually and consistently unscrew bolts of fastening of an inlet collector to a head of the block of cylinders. |
| 8. Weaken collars, the fixing two hoses of the case of a throttle to the lower surface of an inlet collector. |
| 9. Remove an inlet collector from a head of the block of cylinders and separate it from the throttle case. Remove laying. |
| 10. Remove plastic caps, unscrew bolts and remove the resonator from an inlet collector. |