| 1. Remove the generator. |
| 2. Install the generator on a desktop by a pulley down. |
| 3. On the generator of the reduced sizes unscrew screws, release clamps and remove plastic a casing from a back part of the generator. |
| 4. Unscrew screws of fastening of the block of the regulator of tension and the brush holder and take the block from the generator (see rice. Arrangement of screws of fastening of the block of the regulator of tension and brush holder, Extraction of the block of the regulator of tension and brush holder). |
| 5. Measure length of brushes of the generator in a free state from a brand of the manufacturer located sideways to edge of a brush. If length of brushes is less than admissible, replace the block of the regulator of tension and the brush holder. |
| 6. Check a condition of a surface of contact rings of the generator. In the presence on contact rings рисок and scratches polish contact rings from an ispolzov niy a fine-grained emery paper. |
| 7. Collect the generator in the sequence, the return dismantling. |
| 8. Install the generator on the car. |