11.12.3. Lambda sensor


1. A lambda sensor it is screwed in in a reception exhaust pipe and access to it is possible from under the car.
2. Lift a forward part of the car and record on supports or install the car over a viewing hole.
3. The Lambda sensor it is desirable to make removal after cooling of the engine and the exhaust system.
4. Working under the car, remove the metal filter and disconnect the electric Lyambda-datchi socket, fixed on the body bottom. For a detachment of the electric socket turn it on a quarter of a turn counterclockwise and take from a nest.

On later models the electric socket the Lambda sensor is located in interior of the car under a rug for the driver's legs. Disconnect the electric socket the Lambda sensor and take it through a sealing ring in the car bottom.

5. Being careful, unscrew the Lambda sensor from a reception exhaust pipe.


1. Apply on a carving the Lambda sensor a thin film of antiprigarny material. At the same time be careful that antiprigarny material did not get on a working tip of the sensor.
2. Screw in the Lambda sensor in a reception exhaust pipe, tighten it the required moment and connect the electric socket of the sensor.