2.5.4. Check of wear of overlays of a clutch plate


Template for check of wear of overlays of a clutch plate
 And = 55 mm;
In = 26 mm;
With = 7 mm;
D = 14 mm;
Е = 12 mm

Template of satisfactory condition of overlays of a clutch plate
In this provision of a template of an overlay of a clutch plate are in satisfactory condition.

1 – working cylinder of coupling;
2 – laying;
3 – pusher;
4 – template

Shooters showed two tags on a template.

Template of extreme wear of overlays of a clutch plate
 Such provision of a template specifies that overlays of a clutch plate reached extreme wear.

The light arrow – a pusher moves with wear.

Dark arrow – a tag on a template.


PERFORMANCE ORDER
1. Check of wear of overlays of a clutch plate is made without removal of a clutch plate from the car.
2. Check can be executed from the lower party of the working cylinder of coupling and demands a special template which can be made of a metal strip (see rice. A template for check of wear of overlays of a clutch plate).
3. Lift a forward part of the car and record on supports.
4. Insert a template into a groove between a ledge of the working cylinder of coupling and a case.
5. Move a template against the stop until the end of a template contacts with a pusher of the working cylinder of coupling.
6. If two tags on a template are not seen, then overlays of a clutch plate are in satisfactory condition. If two tags on a template are seen, then overlays of a clutch plate reached extreme wear and the clutch plate needs to be replaced (see rice. Template of satisfactory condition of overlays of a clutch plate, Template of extreme wear of overlays of a clutch plate).
7. Remove a template and lower the car.