13.3. System of catching of vapors of fuel
The system of catching of vapors of fuel consists of the valve of cleaning, a thermal valve, one or two coal canisters and connecting hoses.
The valve of cleaning is located in a back part of a motor compartment on the left side of a partition. The canister with coal is installed under an arch of the left forward wheel.
CLEANING VALVE
Removal
| PERFORMANCE ORDER |
| 1. Mark and disconnect vacuum hoses from the cleaning valve. |
| 2. Release the cleaning valve from a bracket of fastening and take it from a motor compartment. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
THERMAL VALVE
Removal
| PERFORMANCE ORDER |
| 1. The thermal valve is established on the left side of a head of the block of cylinders. |
| 2. You perform work on removal of a thermal valve on the cold engine. Partially merge cooling liquid. |
| 3. Disconnect vacuum hoses from a thermal valve and unscrew a thermal valve from a head of the block of cylinders. Remove a sealing ring. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. At installation of a thermal valve it is necessary to use a new sealing ring. |
|