| 1. Remove a weight wire from the accumulator. |
| 2. Remove finishing of the lower part of the dashboard from the driver. |
| 3. Unbend a carpet under pedals and close a floor rags for collecting the liquid which flowed out from hydraulic system of coupling. |
| 4. For reduction of losses of liquid, using the pure syringe, pump out the maximum quantity of liquid from the corresponding camera of a tank of the brake system so that the level of liquid fell below connection of the giving hose of the main cylinder of coupling. |
| 5. Being careful, remove a returnable spring of a pedal of a brake (see rice. Elements of fastening of a pedal of a brake). |
| 6. Disconnect the electric socket from the stoplight switch, then remove the stoplight switch from an arm. |
| 7. Take the forelock from the pin connecting a brake pedal to a pusher of the vacuum amplifier of brakes then take a pin. |
8. Unscrew four nuts of fastening of an arm of pedals to a forward part of a partition of a motor compartment and a bolt, the fixing arm to a forward part of a partition (see rice. An arrangement of nuts of fastening of pedals to a partition of a motor compartment, the Arrangement of a bolt of fastening of an arm of pedals to the top part of a partition of a motor compartment).
Prevention
The nuts fixing an arm of pedals also fix the vacuum amplifier of brakes.
|
| 9. Move an arm of pedals from a partition of a motor compartment, remove it from racks, lower down and disconnect a hose from the main cylinder of coupling. |
| 10. Take an arm with pedals from interior of the car. |