15.5. Ignition coil
SYSTEM OF IGNITION EZL
You watch the corresponding description in subsection 16.4.
SYSTEM OF IGNITION TFZ
Removal
Removal of a protective cover from the ignition coil
Detachment of the central high-voltage wire from the ignition coil
Safety lock arrangement in the top part of the coil of ignition
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove a protective cover from the ignition coil and disconnect the central high-voltage wire from the ignition coil (see rice. Removal of a protective cover from the ignition coil, the Detachment of the central high-voltage wire from the ignition coil). |
| 3. Unscrew nuts and disconnect positive and negative wires from plugs of primary winding of the coil of ignition. Before removal of wires mark them. |
| 4. Unscrew screws of fastening and remove the ignition coil together with an arm from an internal wing. |
| 5. Check the provision of a safety lock on the top part of the coil of ignition (see rice. A safety lock arrangement in the top part of the coil of ignition). If liquid in the coil of ignition overheated because of an overload or internal short circuit, the safety lock will be squeezed out. In this case replace the coil of ignition and remove the cause which caused failure of the coil of ignition. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|