19.4. Gear shifting mechanism
GEAR SHIFTING LEVER
Removal
Removal of a spring latch from the gear shifting lever
| PERFORMANCE ORDER |
| 1. Remove up the lever a protective cover of the lever of gear shifting from the central console. |
| 2. Using a screw-driver edge, wring out the spring latch fixing the gear shifting lever (see rice. Removal of a spring latch from the gear shifting lever). |
| 3. Having pulled up, take the gear shifting lever. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. Check correctness of installation and reliability of fixing of a spring latch. |
|
LEVERS OF THE CHOICE OF TRANSFERS
Removal
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and record on supports. |
| 2. Working under the car, remove spring brackets and disconnect drafts from levers of the choice of transfers. |
| 3. Working in interior of the car, remove decorative overlays of the central console for access to levers of the choice of transfers. |
| 4. Remove the backing light switch from an arm. |
| 5. Unscrew a bolt of fastening of knot of levers of the choice of transfers. |
| 6. Disconnect a cable of the emergency brake from knot of levers of the choice of transfers. |
| 7. Take assembly of levers of the choice of transfers to interior of the car. Remove laying. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. Check that both fastenings are reliably fixed and check adjustment of drafts. |
|
Adjustment
Prevention
Carrying out adjustment requires use of a special adjusting pin.
Fastening of thirsts for levers of the choice of transfers
The sizes of an adjusting pin for adjustment of drafts of gear shifting (all sizes in millimeters)
Arrangement of an adjusting pin in levers of the choice of transfers
|
|
A – adjusting pin;
B – driveshaft |
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and record on supports. |
| 2. Install the gear shifting lever in neutral situation. |
| 3. Working under the car, remove brackets of fastening and disconnect drafts from levers of the choice of transfers (see rice. Fastening of thirsts for levers of the choice of transfers). |
| 4. Make an adjusting pin according to the sizes presented in the drawing the Sizes of an adjusting pin for adjustment of drafts of gear shifting. |
| 5. Insert an adjusting pin through openings in levers of the choice of transfers (see rice. An arrangement of an adjusting pin in levers of the choice of transfers). |
| 6. After fixing establish by an adjusting pin of levers of the choice of transfers drafts of gear shifting on pins of levers. If necessary adjust length of drafts of gear shifting for what weaken a lock-nut and, rotating a tip, establish the required draft length then tighten a lock-nut. |
| 7. After carrying out adjustment establish brackets of fastening and fix drafts on levers, then take an adjusting pin. |
| 8. Lower the car on wheels and check work of drafts of gear shifting. |
|