25.24. Safety cushion elements

PERFORMANCE ORDER

1. Remove a weight wire from the accumulator. In deepening for legs of the driver turn off a floor carpet, then unscrew screws and remove a support for legs from a floor. Disconnect the electric socket of red color of system of the airbag of safety.

SAFETY CUSHION FROM THE DRIVER

Removal

PERFORMANCE ORDER
2. From the back party of a steering wheel unscrew two screws fixing a safety cushion, at the same time for access to screws turn a steering wheel.
3. Establish a steering wheel for the movement directly forward and, being careful, remove a safety cushion from a steering wheel and disconnect the electric socket from the back party of a safety cushion.

Installation

PERFORMANCE ORDER
1. Connect the electric socket to a safety cushion and establish a safety cushion into place in the center of a steering wheel. At the same time check that the wire was not clamped by a safety cushion. Fix a safety cushion by screws, having tightened them the required moment. At the same time first of all it is necessary to tighten the left screw of fastening.
2. Connect the socket of red color of system of the airbag of safety and establish into place a support for legs and a carpet. Check that in the car was nobody, and connect the accumulator. Include ignition and check work of a control lamp of a safety cushion.

SAFETY CUSHION FROM THE PASSENGER

Removal

PERFORMANCE ORDER
2. Unscrew a big bolt of fastening, then remove a safety cushion from the dashboard and disconnect from it the electric socket.

Installation

PERFORMANCE ORDER
1. Connect the electric socket to a safety cushion, install a safety cushion on the dashboard and fix it by a bolt. Check correctness of placement of a safety cushion in the dashboard and if adjustment is necessary, repeatedly remove and establish a safety cushion.