25.11. Combination of devices

Removal

Removal of a combination of devices from the dashboard

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Tighten the parking brake, then lift a forward part of the car and record on supports.
3. Working under the car, move a speedometer drive cable from the transmission to the left. Unscrew a bolt of fastening of a lock ring and take a speedometer drive cable from the transmission. In this case the cable of a speedometer can be taken in interior of the car at removal of a combination of devices.
4. Using a piece of a steel strong wire with a hook on the end, insert a wire into a crack between a combination of devices and the dashboard and, having hooked on a hook, take a combination of devices from the dashboard so that access to a speedometer drive cable (see rice opened. Removal of a combination of devices from the dashboard).
5. Unscrew a ring with a nakatka and remove a speedometer drive cable from a combination of devices, then disconnect electric sockets and remove a combination of devices.

Installation

PERFORMANCE ORDER
1. Connect electric sockets of a combination of devices, then connect a cable of the drive of a speedometer and reliably fix it by a lock ring.
2. Being careful, establish a combination of devices into place, at the same time the cable of the drive of a speedometer has to pass through a partition in a motor compartment, without being overwound and without forming loops.
3. Fix a speedometer drive cable on a box before and lower the car.
4. Connect the accumulator and check work of control lamps for combinations of devices.