25.9. Devices of external lighting

Headlights

Unscrewing of a nut of fastening of the lever of a screen wiper of a headlight

Arrangement of screws of fastening of the decorative panel at the headlight basis

Arrangement of an internal bolt of fastening of a headlight

Arrangement of external bolts of fastening of a headlight

Release of the top clamp of a headlight

Detachment from a headlight of a vacuum hose and the electric socket

Removal of a headlight from the car

PERFORMANCE ORDER
1. On models with screen wipers of headlights note a screen wiper lever arrangement in relation to a headlight. Lift the cap closing a screen wiper lever axis, then unscrew a nut of fastening of the lever and remove the headlight screen wiper lever (see rice. Unscrewing of a nut of fastening of the lever of a screen wiper of a headlight).
2. Remove a bulb of the index of turns.
3. Unscrew screws and remove the decorative panel located at the headlight basis. On models with washers of headlights disconnect a washer hose (see rice. An arrangement of screws of fastening of the decorative panel at the headlight basis).
4. Unscrew bolts of fastening of a headlight (see rice. Arrangement of an internal bolt of fastening of a headlight, Arrangement of external bolts of fastening of a headlight).
5. Release the top clamp of a headlight for what turn it on 90 °, then remove a headlight and disconnect from it a vacuum hose and the electric socket (see rice. Release of the top clamp of a headlight, Detachment from a headlight of a vacuum hose and the electric socket, Removal of a headlight from the car), if necessary, remove headlight glass.
6. Installation is made in the sequence, the return to removal. Slightly tighten bolts of fastening of a headlight and check combination of a headlight with the lower decorative panel and a cowl. If necessary, adjust the provision of a headlight for what weaken bolts of fastening and the top clamp. In conclusion check adjustment of light of headlights.

Forward index of turns

Removal of a bulb from the case of the index of turns

PERFORMANCE ORDER
1. Release a bracket of fastening and take a lamp from the case of the index of turns. Disconnect the electric socket from the case of the index of turns and remove it (see rice. Removal of a bulb from the case of the index of turns).
2. Installation is made in the sequence, the return to removal. Check that the fixing ledges of the index of turns entered guides on a headlight.

Repeater of turns

PERFORMANCE ORDER
1. Being careful, shift the repeater of turns forward and take it from a wing. Turn a cartridge with a bulb counterclockwise and take it from the case of the repeater of turns.
2. Installation is made in the sequence, the return to removal.

Back lamps

PERFORMANCE ORDER
1. From the luggage compartment release a bracket of fastening and remove the holder of bulbs from a back part of a lamp, a loan disconnect the electric socket.
2. Unscrew nuts, then release brackets of fastening and remove a back lamp from the car. Remove the laying located between a back lamp and a body. Check a condition of laying and, in the presence of damages, replace it.
3. Installation is made in the sequence, the return to removal. Check correctness of installation of laying of a back lamp.

Lamp of illumination of registration plate

PERFORMANCE ORDER
1. Unscrew screws and remove a lamp of illumination of registration plate from a trunk lid or a back door and disconnect from it the electric socket.
2. Installation is made in the sequence, the return to removal. Do not draw screws of fastening of a lamp of illumination of registration plate as it is easy to split it.