| 1. The main cylinder of coupling is fixed on an arm of a pedal of coupling and a brake (see rice. Main cylinder of coupling). Liquid to the main cylinder of coupling moves on a flexible rubber hose from the tank with brake fluid located in a motor compartment. |
| 2. Remove a weight wire from the accumulator. |
| 3. Remove finishing of the lower part of the dashboard from the driver. |
| 4. Unbend a carpet under pedals and close a floor rags for collecting the liquid which flowed out from hydraulic system of coupling. |
| 5. For reduction of losses of liquid, using the pure syringe, pump out the maximum quantity of liquid from the corresponding camera of a tank of the brake system so that the level of liquid fell below connection of the giving hose of the main cylinder of coupling. |
| 6. Install a suitable container under the main cylinder of coupling. |
| 7. Unscrew fastenings and disconnect a hydraulic tube from the main cylinder of coupling. Close traffic jams an opening in a tube and the main cylinder of coupling to prevent hit of pollution and to reduce liquid loss. |
| 8. Unscrew two nuts of fastening of the main cylinder of coupling to an arm of pedals. |
| 9. Lift a pedal of coupling and remove a servopruzhina nest, a servopruzhina and a washer from a pusher (see rice. Removal from a pusher of a nest of a servopruzhina of a servopruzhina and washer). |
| 10. Using a screw-driver edge, remove the lock ring fixing a pusher of the main cylinder of coupling to a pedal. |
| 11. Disconnect the giving hose from the main cylinder of coupling and take the main cylinder of coupling from the car. |