Hydraulic device


1. Remove a weight wire from the accumulator.
2. Unscrew screws and uncover the hydraulic device.
3. Dress a pure transparent hose on the union of pumping of the hydraulic device (SP tag) and establish the second end of a hose in a vessel. Unscrew the union of pumping and merge brake fluid in a vessel.
4. Release a bracket of fastening and disconnect the electric socket from the hydraulic device.
5. Disconnect brake tubes from the hydraulic device.
6. Unscrew a nut and remove the grounding tire from the hydraulic block.
7. Unscrew bolts and remove гидравличес which device.

Do not disassemble the modulator of the hydraulic device as its repair is not provided.


1. Installation is made in the sequence, the return to removal taking into account the next moments:
a – check a condition of rubber plugs and, if necessary, replace them;
b – according to earlier made marking connect brake tubes to the hydraulic device and fix by nuts, having tightened them the required moment;
c – remove air from the brake system.