22.21.2.3 Pressure accumulator

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Unscrew screws and uncover the hydraulic device.
3. Dress a pure transparent hose on the union of pumping of the hydraulic device (SP tag) and establish the second end of a hose in a vessel. Unscrew the union of pumping and merge brake fluid in a vessel.
4. Disconnect pressure accumulator tubes from the basis of the hydraulic device.
5. Tighten the parking brake, then lift a forward part of the car and record on supports. Remove the left forward wheel.
6. Unscrew screws and remove protection of a wing from under an arch of the left wing.
7. Unscrew the nuts fixing pressure accumulator to an arm then, being careful, remove pressure accumulator together with tubes.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal taking into account the next moments:
a – at installation check correctness of connection of tubes to the hydraulic device;
b – tighten connecting nuts of fastening of tubes the required moment;
c – remove air from the brake system and the hydraulic device.