Mercedes-Benz:: E-class W124:: Replacement of the bearing in an end face of a bent shaft

1. Maintenance (petrol engines)
2. Maintenance (diesel engines)
3. Repair of the 4-cylinder petrol engine installed in the car
4. Repair of 6-cylinder petrol SOHC engines
5. Repair of 6-cylinder petrol DOHC engines
- 5.1. Technical characteristic
- 5.2. General information
- 5.3. Repair operations on the engine installed in the car
- 5.4. Check of pressure of compression
- 5.5. Top Dead Point (TDP) of the piston of the first cylinder
- 5.6. Cover of a head of the block of cylinders
- 5.7. Pulley of a bent shaft / quencher of tortional fluctuations and nave
- 5.8. Covers of a driving chain
- 5.9. Check and replacement of a driving chain
- 5.10. Mechanism of a tension of a driving chain, asterisk and uspokoitel of a chain
- 5.11. Tension mechanism boot
- 5.12. Mechanism of adjustment of the camshaft
- 5.13. Camshafts and pushers
- 5.14. Check and adjustment of position of camshafts
- 5.15. Head of the block of cylinders
- 5.16. Oil pallet
- 5.17. Oil pump chain and drive
- 5.18. Drive flywheel / plate
- 5.19. Replacement of sealing rings
- 5.20. Replacement of the bearing in an end face of a bent shaft
- 5.21. Check and replacement of a support of the power unit
- 5.22. Oil heater
6. Repair of the diesel engine installed in the car
7. Capital repairs of engines
8. Cooling systems, heating and ventilation
9. Fuel system with the carburetor
10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
11. System of injection of BOSCH HFM fuel
12. Fuel system of diesel engines
13. Fuel system of diesel engines
14. System of start and charging
15. System of ignition of 4-cylinder petrol engines
16. System of ignition of 4-cylinder petrol engines
17. System of prestarting heating of diesel engines
18. Coupling
19. Mechanical transmission
20. Automatic transmission
21. Main reverse gear, driving and cardan shaft
22. Brake system
23. Suspension bracket and steering
24. Body
25. Electric equipment
26. Definition of malfunctions
27. Governing bodies and control devices

5.20. Replacement of the bearing in an end face of a bent shaft

You watch subsection 3.18.