| 1. Lift a floor mat, then unscrew screws of fastening and remove the covering located around pedals. |
| 2. Unscrew the screw of fastening of the lever of opening of a cowl and remove the lever from the lower finishing of the dashboard from the driver and disconnect a cable of opening of a cowl from the lever. Unscrew and take the screws fixing the lever of the parking brake to the dashboard. |
| 3. Being careful, remove the decorative panel of the lock of ignition. |
| 4. Unscrew screws and remove the lower finishing of the dashboard from the driver. Disconnect a cable from a back part of the lever of release of the parking brake and remove the panel of finishing and the lever. |
| 5. Under the dashboard disconnect the electric socket from the switch of a control lamp of the parking brake (see the drawing). |
| 6. Release clamps and remove the switch of a control lamp of the parking brake. |
| 7. Installation of the switch is made in the sequence, the return to removal. |