| 1. Remove a steering wheel. |
| 2. Remove the proofreader of light of headlights. |
| 3. Lift a floor mat, then unscrew screws of fastening and remove the covering located around pedals. |
| 4. Unscrew the screw of fastening of the lever of opening of a cowl and remove the lever from the lower finishing of the dashboard from the driver and disconnect a cable of opening of a cowl from the lever. Unscrew and take the screws fixing the lever of the parking brake to the dashboard. |
| 5. Being careful, remove the decorative panel of the lock of ignition. |
| 6. Unscrew screws and remove the lower finishing of the dashboard from the driver. Disconnect a cable from a back part of the lever of release of the parking brake and remove the panel of finishing and the lever. |
| 7. Exempt an electrical wiring from brackets of fastening and disconnect the electric socket from the multipurpose switch. |
| 8. Unscrew screws and remove a casing of a steering column, and then remove the multipurpose switch (see rice. Arrangement of screws of fastening of the multipurpose switch, Removal of the multipurpose switch from a steering column). If necessary, remove the switch of speed control of the movement from the main multipurpose switch. |
| 9. Installation of the switch is made in the sequence, the return to removal. |