3.19. Check and replacement of a support of the power unit
Check
Arrangement of forward support of fastening of the power unit
|
|
The power unit leans on three support. Two support from two parties of the engine and one support on a back part of the transmission. |
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and record on supports. |
| 2. Check a condition of rubber elements of a suspension bracket for existence of cracks, aging and stratification. |
| 3. Check reliability of fastening of suspension brackets of the power unit. |
| 4. Moving the engine here and there, check a side play in suspension brackets of the power unit. New elements of a suspension bracket have to have an insignificant side play even. |
|
Replacement
FORWARD SUPPORT
| PERFORMANCE ORDER |
| 1. Hook on the power unit slings of the load-lifting mechanism and raise so that the weight of the power unit was perceived by the load-lifting mechanism. |
| 2. Unscrew the bolts fixing an arm of a support of the power unit to the engine. |
| 3. Unscrew the bolts fixing a rubber element of a support to a beam and remove support of the power unit. |
| 4. Installation is made in the sequence, the return to removal. |
|
BACK SUPPORT OF THE POWER UNIT
| PERFORMANCE ORDER |
| 1. Lift a forward part of the car and record on supports. |
| 2. Establish a jack under the transmission and through wooden whetstone support the transmission. |
| 3. Unscrew bolts and remove a back support of the power unit. |
| 4. Installation is made in the sequence, the return to removal. |
|