9.13. Heater of an inlet collector

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Disconnect the electric socket from a heater of an inlet collector.
3. In the presence unscrew, and remove an arm of support of an inlet collector.
4. Unscrew screws and remove a heater from an inlet collector. Remove laying and a sealing ring.

Installation

PERFORMANCE ORDER
1. Establish a new rubber ring and a sealing ring on a heater.
2. Establish a heater on an inlet collector and screw screws.
3. Connect the electric socket to a heater, then establish an arm of support of an inlet collector.
4. Connect a weight wire to the accumulator.