9.5. Fuel pump

Removal

Removal of the fuel pump from the engine

Extraction of a pusher of the drive of the fuel pump

Removal of the sealing block of the fuel pump

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Install under the fuel pump a container with rags. Mark the fuel hoses connected to the fuel pump. Weaken collars and remove the giving and returnable fuel hoses from the fuel pump.
3. Unscrew nuts and remove the fuel pump from the engine (see rice. Removal of the fuel pump from the engine).
4. Take a pusher and remove the condensing block (see rice. Extraction of a pusher of the drive of the fuel pump, Removal of the sealing block of the fuel pump).
5. Check a condition of sealing rings of round section and, if necessary replace them.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. Establish a pusher so that the lock ring on a pusher was from the fuel pump. Before installation of the fuel pump check freedom of movement of a pusher in the condensing block.