10.3. Accelerator cable

Removal


Removal of the square fastener for release of a cable of an accelerator

Extraction of a cable of an accelerator its transmission through a groove in a lever arm

Arrangement of brackets of fixing of a cover of a cable of an accelerator

Fastening of a cable of an accelerator to an accelerator pedal
A – the lever located in the top part of a pedal of an accelerator;
B – nut of adjustment of a free wheeling of a pedal of an accelerator;
C – sealing ring;
D – a pin for fastening of a returnable spring;
E – accelerator cable

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. In a motor compartment remove an accelerator cable, previously having removed the square fastener (see rice. Removal of the square fastener for release of a cable of an accelerator, Extraction of a cable of an accelerator its transmission through a groove in a lever arm). Take an accelerator cable, having passed it through a groove in a lever arm.
3. Press the fixing uvulas and release an accelerator cable cover from an arm (see rice. Arrangement of brackets of fixing of a cover of a cable of an accelerator).
4. Remove the finishing panel located under the dashboard from the driver. Remove a returnable spring and disconnect an accelerator cable from the accelerator pedal lever. Unscrew an adjusting nut, then take an accelerator cable through consolidation перегород ки a motor compartment (see rice. Fastening of a cable of an accelerator to an accelerator pedal).
Prevention

Do not remove a sealing ring of a cable of an accelerator from an internal partition of a motor compartment.
5. On an external partition of a motor compartment remove a sealing ring and take an accelerator cable in a motor compartment.