24:24. External details of a body
Overlays of an arch of a wheel and lower part of a body
| PERFORMANCE ORDER |
| 1. The decorative slips and panels fixed on the lower part of a body fasten screws, nuts and brackets. Consistently unscrew screws, release brackets and remove the required panel. For removal of the majority of brackets of fastening it is only enough to wring out of them. For removal of percussion caps of fastening of panels unscrew the screw from their central part or take a pin then take a percussion cap. |
| 2. At installation of panels replace fastening brackets which were broken at removal. |
|
Elements of finishing of a body
| PERFORMANCE ORDER |
| 1. Elements of finishing of a body fasten with use of a special adhesive tape. For removal of elements of finishing of their body it is necessary to heat previously therefore the glue layer is softened, then it is necessary to cut off them from a body surface. When cutting elements of finishing of a body be careful not to damage a paint and varnish covering of a body. |
|