24:17. Trunk lid lock

Removal

Release of the fixing brackets fixing the back panel of finishing of the luggage compartment

Removal of the back panel of finishing of the luggage compartment

Detachment of the electric socket of the lock of a luggage carrier

Removal of the lock of a luggage carrier

PERFORMANCE ORDER
1. Open a trunk lid, then remove a weight wire from the accumulator.
2. Being careful, release clamps and remove the back panel of finishing of the luggage compartment (see rice. Release of the fixing brackets fixing the back panel of finishing of the luggage compartment, Removal of the back panel of finishing of the luggage compartment). In the panel of finishing of the luggage compartment there is a special cover after which removal it is possible to make only adjustment of position of the lock of a luggage carrier.
3. On models with the central lock disconnect draft of the lock of a luggage carrier from the executive mechanism of the central lock. For this purpose move the blocking plug to the executive mechanism and disconnect draft.
4. Using a marker or a pencil, note an arrangement of bolts of fastening of the lock. Disconnect the electric socket of the lock of a luggage carrier and release wires from fastening brackets (see rice. Detachment of the electric socket of the lock of a luggage carrier).
5. Unscrew bolts of fastening and remove the luggage carrier lock (see rice. Removal of the lock of a luggage carrier). If necessary replace a rubber sealing ring of the lock of a luggage carrier.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. Check operation of the lock of a luggage carrier and, in the presence, the executive mechanism of the central lock. If necessary, weaken bolts of fastening of the lock and, moving the lock, adjust its situation, or shift the blocking plug of draft of the lock and move it to required position.