1. Remove a weight wire from the accumulator. Open a back door, then take percussion caps and remove the lower upholstery of a back door. For extraction of a percussion cap unscrew the central screw and take a percussion cap from an upholstery (see rice. Extraction of a percussion cap of fastening of an upholstery of a back door, Removal of the lower upholstery of a back door). |
2. Disconnect a decorative cover of the button of the lock of a back door, then release the internal panel and remove it from a back door (see rice. Removal of a decorative overlay of the button of the lock of a door). |
3. Note an arrangement of drafts and disconnect them from the door lock (see rice. A detachment of drafts from the door lock). |
4. Disconnect the electric socket located on lock wires, then unscrew bolts of fastening and remove the lock from a back door together with a rubber sealing ring of the cylinder of the lock. Perhaps, for release of space for removal of the lock it is necessary to unscrew the screw and to remove the internal handle of the lock from a back door (see rice. Detachment of the electric socket of the lock of a back door, Arrangement of bolts of fastening of the lock of a back door, Removal of the lock of a back door, Unscrewing of the screw fixing the internal handle of the lock of a back door). |
5. Repair of the lock of a back door needs to be made at service station. The only thing that can be replaced independently, is the microswitch and the engine of closing of the lock. If necessary, unscrew bolts and remove the lock cylinder from the lock of a back door (see rice. An arrangement of bolts of fastening of the cylinder of the lock to the lock of a back door). |