24:21. External rear-view mirrors
Mirror with manual adjustment
| PERFORMANCE ORDER |
| 1. Release a bracket of fastening of the handle of adjustment of a mirror and remove the handle. |
| 2. From the inside of a door remove a decorative overlay of a mirror for what disconnect its top part, then move a slip up and remove it from a door. |
| 3. Unscrew screws and remove a rear-view mirror from a door. Remove the rubber consolidation established between a door and a mirror, check its state and, if necessary, replace. |
| 4. Installation is made in the sequence, the return to removal. If the mechanism of adjustment of provision of a mirror has a side play, eliminate it, having tightened the screw close to the adjustment handle. |
|
Mirror with the electric drive
Unscrewing of the screw of fastening of the electric socket of a mirror
Arrangement of screws of fastening of an external rear-view mirror
Mirror glass
Prevention
Glass of a mirror is pasted to the electric motor therefore at its removal be careful not to break glass.
| PERFORMANCE ORDER |
| 1. Turn glass so that the inside of glass was included at the maximum size into the mirror case. Then insert a wide plastic or wooden wedge between glass of a mirror and the plastic case of a mirror. Being careful, remove mirror glass. |
| 2. In the presence disconnect electric sockets from an element of heating of a mirror. |
| 3. Connect electric sockets to an element of heating of a mirror, then being careful, establish mirror glass before its accurate fixing. |
|
Engine of adjustment of provision of a mirror
| PERFORMANCE ORDER |
| 1. Remove mirror glass. |
| 2. Unscrew screws and remove the engine of provision of adjustment of a mirror and disconnect from it the electric socket. |
| 3. Connect the electric socket to the engine and fix the engine by screws. Check operation of the engine of adjustment of provision of a mirror, then establish mirror glass. |
|