24:29. Central console

Removal

Removal of a decorative frame of the lever of the choice of transfers on models with the automatic transmission

Unscrewing of the screw of fastening of a back part of a decorative cover to the central console

Removal of a decorative cover from the central console

Removal of handles of management of a heater

Arrangement of nuts (1) and screws (2) fastenings of the panel of a heater

Removal of the panel of a heater

Arrangement of screws of fastening of the regulator of temperature

Removal of the panel of adjustment of temperature from the central console

Removal of the block of switches from the central console

Arrangement of nuts of fastening of the central console to the dashboard

Arrangement of screws of fastening of a forward part of the central console

Unscrewing of the screw of fastening of a back part of the central console

Removal of the central console

Arrangement of the screw of fastening of a side part of a rug

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove decorative finishing and porolonovy inserts from a back part of the central console.
3. Being careful, take a decorative frame of the lever of gear shifting from the central console (see rice. Removal of a decorative frame of the lever of the choice of transfers on models with the automatic transmission).
4. Unscrew the screw, fixing a back part of a decorative cover to the central console and uncover the car (see rice. Unscrewing of the screw of fastening of a back part of a decorative cover to the central console, Removal of a decorative cover from the central console).
5. Having pulled on itself, remove handles of the regulator of a heater and the fan of a heater. Unscrew two big nuts, the fixing regulators, then unscrew two screws located in the lower part and remove the heater panel (see rice. Removal of handles of management of a heater, Arrangement of nuts and screws of fastening of the panel of a heater, Removal of the panel of a heater).
6. Unscrew four screws and remove the panel of adjustment of temperature from a forward part of the central console and disconnect the electric socket from the panel (see rice. Arrangement of screws of fastening of the regulator of temperature, Removal of the panel of adjustment of temperature from the central console).
7. Disconnect the ring switches located in the top part of the panel of switches. Being careful, release the fastening brackets located from two parties of the panel of switches and, having pulled on themselves, remove switches from the central console for access to nuts of fastening of the central console. Unscrew two nuts fixing the central console to the dashboard (see rice. Removal of the block of switches from the central console, the Arrangement of nuts of fastening of the central console to the dashboard).
8. Remove the radio receiver.
9. Release brackets of fastening and remove the panel of switches from a back part of the central console.
10. Unscrew screws of fastening of the central console to a car floor (see rice. Arrangement of screws of fastening of a forward part of the central console, Unscrewing of the screw of fastening of a back part of the central console).
11. Raise the central console, remove it from the lever of gear shifting and take from the car (see rice. Removal of the central console).
12. If necessary, after removal of the central console unscrew screws and release clamps, and then remove side parts of a rug (see rice. Arrangement of the screw of fastening of a side part of a rug).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. In conclusion check operation of all switches.