| 1. Tighten the parking brake, then lift a forward part of the car and record on supports. |
| 2. Open a cowl, unscrew a nut and take the bolt located in the top part on the center of a bumper (see rice. Unscrewing of the nut located on the center of a bumper in its top part). |
| 3. On models with the index of temperature of external air on a combination of devices unscrew screws and remove registration plate from a front bumper. Remove two rubber caps, then unscrew the screw of fastening and remove the sensor of temperature of external air and a support of registration plate from a bumper (see rice. An arrangement of caps on a support of forward registration plate, Removal of a support of forward registration plate). |
| 4. From under the car unscrew bolts, the fixing ends of a bumper to an arm. On models with the oil heater unscrew an arm of the heat exchanger and remove the heat exchanger for access to the left bolts of fastening of a bumper. |
| 5. Unscrew nuts of fastening of a bumper and remove a bumper. |
| 6. Check a condition of arms of a bumper and, in the presence of damages, replace them. |