24:20. Elements of the central lock
Removal
Prevention
On later models quick-detachable connectors of vacuum hoses for which rassoyedineniye it is rather simple to displace tips are established.
Pump of the central lock
Places of connection to the hydraulic pump of the electric socket and a vacuum tube
| PERFORMANCE ORDER |
| 1. Remove a pillow of a back seat. On the Station wagon and Coupet models remove the right pillow. |
| 2. The pump is located on the right side under a pillow of a back seat. For access to the pump lift a rug, and also on some models previously remove surrounding panels of finishing. |
| 3. Move a noise-attenuating covering aside, then lift the hydraulic pump, disconnect from it the electric socket and a vacuum tube and take the pump from the car (see rice. Places of connection to the hydraulic pump of the electric socket and a vacuum tube). |
|
Executive mechanism of the lock of a door
Arrangement of bolts of fastening of the executive mechanism to a door
Connection arrangement to the executive mechanism of the electric socket and a vacuum hose
Executive mechanism of a folding shutter of a jellied mouth of the fuel tank
Arrangement of the executive mechanism of a folding shutter of a jellied mouth of the fuel tank
| PERFORMANCE ORDER |
| 1. For access to the executive mechanism remove the right panel of finishing of the luggage compartment. |
| 2. On early models remove a vacuum hose from the executive mechanism, then unscrew screws of fastening and remove the executive mechanism. |
| 3. On later models mark and disconnect vacuum hoses from the executive mechanism, then release a bracket of fastening and remove the executive mechanism (see rice. Arrangement of the executive mechanism of a folding shutter of a jellied mouth of the fuel tank). |
|
Executive mechanism of the lock of a trunk lid
Removal of the executive mechanism of the lock of a trunk lid
| PERFORMANCE ORDER |
| 1. Open a trunk lid, then remove a weight wire from the accumulator. |
| 2. Being careful, release clamps and remove the back panel of finishing of the luggage compartment. In the panel of finishing of the luggage compartment there is a special cover after which removal it is possible to make only adjustment of position of the lock of a luggage carrier. |
| 3. On models with the central lock disconnect draft of the lock of a luggage carrier from the executive mechanism of the central lock. For this purpose move the blocking plug to the executive mechanism and disconnect draft. |
| 4. Unscrew screws and remove the executive mechanism of the lock of a trunk lid together with its back cover. If necessary, remove a back cover from the executive mechanism. |
|
Executive mechanism of the lock of a back door
Arrangement of screws of fastening and draft of the executive mechanism of the lock of a back door
Removal of the executive mechanism of the lock of a back door
| PERFORMANCE ORDER |
| 1. Open a back door, take percussion caps of fastening of the lower part of the panel of finishing of a back door and remove the panel. For extraction of percussion caps previously unscrew from them the central screws. |
| 2. Having pulled up, remove a decorative cover of the button of the lock of a back door, then release the internal panel and remove it from a back door. |
| 3. Disconnect draft from the lock or move the blocking plug to the executive mechanism and disconnect draft of the lock from the executive mechanism. |
| 4. Unscrew screws and take the executive mechanism from a door. |
| 5. Disconnect the electric socket and/or a vacuum hose from the executive mechanism and remove the executive mechanism from a door (see rice. Arrangement of screws of fastening and draft of the executive mechanism of the lock of a back door, Removal of the executive mechanism of the lock of a back door). |
|
The electronic control control unit (ECU) on later models with remote control of the central lock
| PERFORMANCE ORDER |
| 1. The electronic control control unit is located behind the hydraulic pump under a back seat. |
| 2. For access to the ECU block remove a pillow of a back seat and move a carpet aside. |
| 3. Disconnect the electric socket from the control unit, then unscrew nuts and remove the control unit from the car. |
|
The receiver of infrared radiation of a door of the driver on later models with remote control of the central lock
| PERFORMANCE ORDER |
| 1. Remove the lock cylinder from the driver's door. |
| 2. On the Sedan and Station wagon models remove the cap located in the top part of a back end face of a door, then disconnect the electric socket, release the receiver and take it from a door. |
| 3. On Coupet's models unscrew screws and remove the decorative panel of finishing of a back end face of a door. Disconnect the electric socket, then release a bracket of fastening and remove the receiver from a door. |
|
The receiver of infrared radiation of a trunk lid on the late Sedan and Coupet models with remote control of the central lock
| PERFORMANCE ORDER |
| 1. Unscrew screws and remove the back panel of finishing of the luggage compartment. |
| 2. Unscrew the screw and remove an arm of fastening of the receiver. |
| 3. Disconnect the electric socket from the receiver, then disconnect the receiver and remove it from the car. |
|
The receiver of infrared radiation of a back door on later Station wagon models with remote control of the central lock
| PERFORMANCE ORDER |
| 1. Remove the lock from a back door. |
| 2. Disconnect the sensor and remove it from the lock. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. Before installation of the panel of finishing check operation of the central lock. Adjustment of draft of the executive mechanism can be made after movement of the blocking plug to the executive mechanism and repeated installation of draft. |
|