24:18. Back door

Removal

Removal of the panel of finishing from the left rack of a back door

Removal of the top panels of finishing of racks of a back door

Unscrewing of the forward screw of fastening of the panel of finishing of a ceiling

Arrangement of back screws of fastening of the panel of finishing of a ceiling

Removal of the panel of finishing of a ceiling

Removal of a ceiling for access to connecting plugs

Arrangement of connecting plugs of an electrical wiring of a back door

Arrangement of a junction of a hose of a washer of back glass and vacuum hose of the central lock

Arrangement of bolts of fastening of the hinge to a back door

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove side panels of finishing of the luggage compartment for access to the panel of finishing of a rack of a back door. For access improvement on the left side take a spare wheel.
3. Release brackets of fastening and from the left and right side remove the lower panels of finishing from racks of a back door (see rice. Removal of the panel of finishing from the left rack of a back door).
4. Take from the top panels of finishing of racks of a back door of a lamp of illumination of the luggage compartment, then disconnect from them electric sockets and take lamps from the car.
5. Unscrew screws, the fixing top panels of finishing of racks of a back door. For extraction of panels from brackets of fastening move them down and remove from the car (see rice. Removal of the top panels of finishing of racks of a back door).
6. Unscrew the screws fixing the back panel of finishing of a ceiling, then move the panel back and remove it from the car (see rice. Unscrewing of the forward screw of fastening of the panel of finishing of a ceiling, Arrangement of back screws of fastening of the panel of finishing of a ceiling, Removal of the panel of finishing of a ceiling).
7. Remove a ceiling and move the block of connecting plugs of an electrical wiring of a back door on the left side of the car (see rice. Removal of a ceiling for access to connecting plugs, the Arrangement of connecting plugs of an electrical wiring of a back door). Mark each wire, then unscrew screws and remove wires from the block of plugs. Remove a sealing ring from a body and take an electrical wiring of a back door from a body in order that it could be removed together with a back door.
8. Disconnect a hose of a washer of back glass and a vacuum hose of the central lock and take them from a body so that they could be removed together with a back door (see rice. Arrangement of a junction of a hose of a washer of back glass and vacuum hose of the central lock).
9. Using a marker or a pencil, note position of each hinge on a back door.
10. Using two assistants, unscrew bolts, the fixing hinges to a back door and remove a back door from the car (see rice. An arrangement of bolts of fastening of the hinge to a back door).
11. Check a condition of hinges of a back door and, if necessary, replace them.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. Combine hinges of a back door according to the tags put before removal. Without installing the finishing panel, connect the accumulator and check operation of all electric units of a back door. After installation of a door check that the gap on perimeter of a door was everywhere identical, and also that the external surface of a door was aflush with other elements of a body. For adjustment of a gap on perimeter of a door weaken bolts of fastening of hinges of a door and, moving a door, adjust its situation then tighten fastening bolts.