| 1. Check a condition of laying of a head of the block of cylinders in the place interfaced to a cover of a driving chain. |
| 2. Clear the interfaced surfaces of the block of cylinders of the engine and a cover of a driving chain of the remains of old laying and sealant. |
| 3. Using a screw-driver edge as the lever, take a sealing ring of a bent shaft from a cover of a driving chain. Oil pure engine an external surface of a new sealing ring and establish it in a cover of a driving chain (see rice. Removal of a sealing ring of a bent shaft from a cover of a driving chain, Installation of a new sealing ring of a bent shaft in a cover of a driving chain, Installation of a sealing ring of a bent shaft with use of wooden whetstone). |
| 4. Check a condition of a sealing ring of round section of a maslopriyemny tube on a back part of the oil pump (see rice. Check of a condition of a sealing ring of a maslopriyemny tube and drawing on it a thin layer of engine oil). Oil a sealing ring pure engine. |
| 5. Establish new laying or apply a thin film of sealant on the surface of the block of cylinders interfaced to a cover of a driving chain (see rice. Drawing a thin layer of sealant on the surface of the block of cylinders interfaced to a cover of a driving chain). |
| 6. Establish a cover of a driving chain on the directing pins. |
| 7. By hand screw up bolts of fastening of a cover of a driving chain. |
| 8. Establish an arm of a maslopriyemny pipe and fix it by bolts and a nut. |
| 9. Install the expansion plug on the forward end of a bent shaft. At the same time be careful not to damage a forward sealing ring of a bent shaft (see rice. Installation of the expansion plug on the forward end of a bent shaft). |
| 10. Install the generator together with an arm. |
| 11. Install the compressor of the air conditioning system and its arm. |
| 12. Establish an arm of fastening of the compressor of the air conditioning system and pump of the amplifier of steering. |
| 13. Screw in three bolts fixing a cover of a driving chain to a head of the block of cylinders, but do not tighten them finally. |
| 14. Evenly and in the diagonal sequence tighten bolts of fastening of a cover of a driving chain the required moment. |
| 15. Tighten three top bolts of fastening of a cover of a driving chain to a head of the block of cylinders the required moment. |
| 16. If the new cover of a driving chain is established, it is necessary to adjust the provision of an arm of fastening of the sensor of an angle of rotation of a bent shaft. |
| 17. Connect the electric socket to the sensor of an angle of rotation of a bent shaft. |
| 18. Establish a cover of a head of the block of cylinders. |
| 19. Install the pump of system of the self-leveled back suspension bracket. |
| 20. Install the ignition distributor. |
| 21. Install the air filter. |
| 22. Install the water pump. |
| 23. Establish a nave and a pulley of a bent shaft on a bent shaft. |
| 24. Establish elements of the mechanism of a tension of an auxiliary driving belt in the sequence, the return to removal. |
| 25. Install the oil pallet. |
| 26. Install the forward stabilizer of cross stability. |
| 27. Install the pump of the amplifier of steering. |
| 28. Establish a radiator. |