| 1. Remove a weight wire from the accumulator. |
| 2. Open a cowl and establish it in vertical position. |
| 3. Press the fixing brackets and remove a casing from the ignition distributor (see the drawing). |
| 4. Mark and remove high-voltage wires from spark plugs. |
| 5. Using an edge of the thin screw-driver, raise a casing of high-voltage wires on a cover of a head of the block of cylinders and displace it aside, without disconnecting from it high-voltage wires. If necessary mark and disconnect high-voltage wires from an ignition distributor cover. |
| 6. Weaken collars and remove a hose of ventilation of a cover of a head of the block of cylinders from the air filter. |
| 7. Weaken a collar and disconnect a hose of ventilation of a case from a cover of a head of the block of cylinders. |
| 8. Unscrew 8 bolts and uncover a head of the block of cylinders. Remove laying. |