4.15. Replacement of a chain of the drive of the oil pump
Prevention
When replacing a chain of the drive of the oil pump it is also necessary to replace an asterisk of the oil pump.
At removal of a chain it is necessary to use an emery circle or vulkanit, for cutting of the coming-out hats of one of chain links.
Removal of a driving chain of the oil pump
|
|
1 – the fixing plate;
2 – chain link;
3 – bolt of fastening of an asterisk of the oil pump;
4 – asterisk of the oil pump |
| PERFORMANCE ORDER |
| 1. Remove the oil pallet. |
| 2. Weaken a bolt of fastening of an asterisk of the oil pump. |
| 3. Using an emery circle or vulkanit, a soshlifuyta of a rivet of one of chain links. |
| 4. Remove the fixing plate of a link of a chain and beat out a chain link (see the drawing). |
| 5. Unscrew a bolt of fastening of an asterisk of the oil pump and remove an asterisk from a pump shaft. |
| 6. Establish a new asterisk on a shaft of the oil pump by the convex party to the pump. |
| 7. Using the link removed from a chain, connect the end of an old chain to a new chain. Turning a bent shaft of the engine clockwise, pass a new chain around an asterisk of a bent shaft. At the same time constantly support chain branches tense so that she did not act from an asterisk of a bent shaft. |
| 8. After an exit of a new chain disconnect from it an old chain. |
| 9. Establish the ends of a new chain on an asterisk of the oil pump and connect them a connecting link. |
| 10. Establish the fixing plate on a connecting link of a chain and a rasklepayta a connecting link. Check that after a rasklepyvaniye of a connecting link there were no metal agnails. |
| 11. Tighten a bolt of fastening of an asterisk of the oil pump the required moment. |
| 12. Install the oil pallet. |
|