A seat belt of forward sitting on Coupet's models

1. Remove a weight wire from the accumulator.
2. Remove a decorative cover from a bolt of the lower fastening of a seat belt, then unscrew a bolt and remove it and a washer.
3. Remove a pillow and a back of the corresponding back sitting.
4. Unscrew screws and uncover the forward party of the panel of finishing of a side part of back sitting.
5. Remove consolidation of a door from a door rack.
6. Remove the switch of a window regulator from an armrest and disconnect from it the electric socket.
7. Unscrew screws and remove an armrest.
8. Unscrew screws and remove the protective panel of a threshold of a door.
9. Disconnect and remove the side panel of finishing of salon.
10. On models with the mechanism of a tension of a seat belt disconnect the electric socket from the tension mechanism on an inertial drum.
11. Unscrew a bolt and remove the top fastening of a seat belt. Remove a guide of a belt and disconnect it from the mechanism of adjustment of height of fastening of a seat belt.
12. Unscrew a bolt of fastening of an inertial drum and remove a seat belt from a door rack.

On models with the mechanism of a tension of a seat belt do not disconnect the tension mechanism from an inertial drum.