1. Establish a segment spline in a camshaft groove. |
2. Check that adjusting tags of distributive and cranked shaft are combined with indexes. At installation of a new asterisk apply on it a tag in the same place, as on an old asterisk. |
3. Insert an asterisk into a chain according to earlier put tags. |
4. Install an asterisk on the camshaft. On models with a single-row chain the ledge of a nave of an asterisk has to be directed to the camshaft, and on models with a two-row chain the curved party of an asterisk has to be directed to the camshaft. |
5. Fix the camshaft from a provorachivaniye and screw in a bolt of fastening of an asterisk, having tightened it the required moment. |
6. Install the mechanism of a tension of a driving chain. |
7. For a bolt of a pulley of a bent shaft turn a bent shaft of the engine on two whole revolutions and check that all adjusting tags were combined with indexes. Otherwise remove an asterisk from the camshaft and move a chain on one tooth of an asterisk. |
8. Establish a cover of a head of the block of cylinders. |
9. Install the system pump самовырав нивающейся a back suspension bracket. |
10. Establish a krylchatka of the fan and a casing. |
11. Install the air filter. |