24.14.2. Installation

Internal handle of opening of a door

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

Cylinder of the lock of a forward door

PERFORMANCE ORDER
1. Insert the lock cylinder into a casing, then establish draft and a spring and fix them by the fixing pin. Check operation of the cylinder of the lock.
2. Check correctness of an arrangement of consolidation, then insert a lock cylinder casing into place, combining draft of the cylinder of the lock with the door lock. Check correctness of a relative positioning of the lock and cylinder of the lock, then screw in the screw of fastening of the cylinder of the lock and establish a cap at a door end face.

External handle of opening of a forward door

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. Check correctness of an arrangement of laying of the handle for doors. Check correctness of combination of the lever of the handle with draft of the lock, then install the lock cylinder. Check operation of the lock and handle. Establish a protective film and an upholstery of a door on a door.

Lock of a forward door

Removal of a cap for adjustment of a gap between draft of the lock and the lever of the external handle

Rotation of the eccentric screw for adjustment of a gap between draft of the lock and the lever of the external handle

PERFORMANCE ORDER
1. In the presence, connect the electric socket to the lock, then put the lock into place. At the same time the lever of the lock has to be installed behind the handle lever. Screw in screws of fastening of the lock and tighten them the required moment.
2. Install the lock cylinder.
3. Check a gap between draft of the lock and the lever of the external handle. The gap has to be in limits of 0 - 1 mm. For adjustment of size of a gap remove a cap from an end face of a door and, rotating the eccentric screw, adjust a gap (see rice. Removal of a cap for adjustment of a gap between draft of the lock and the lever of the external handle, Rotation of the eccentric screw for adjustment of a gap between draft of the lock and the lever of the external handle). After adjustment of a gap establish a cap into place.
4. Connect thirst for the lock and fix it in a guide on a door. On models with the central lock install the executive mechanism.
5. Check operation of the lock, then establish a protective film and an upholstery of a door on a door.

External handle of opening of a back door

PERFORMANCE ORDER
1. Establish a handle arm on a door, screw in screws of fastening and tighten them the required moment.
2. Establish laying and the handle on a door. At the same time the lever of the handle has to be combined with draft of the lock.
3. Establish an emphasis of the handle and fix it by the screw, then establish into place consolidation of a door.
4. Check operation of the lock of a back door, then establish a protective film and an upholstery of a door on a door.

Lock of a back door

PERFORMANCE ORDER
1. Put the lock of a back door into place and fix by screws, having tightened them the required moment.
2. Connect to the lock of draft and fix them in guides on a door.
3. Install the external handle of a back door and check operation of the lock. Establish a protective film and an upholstery of a door on a door.