4.11.1. Removal

1. Remove the air filter.
2. Remove a camshaft asterisk.
3. Unscrew bolts and uncover a spray oil with top parts of camshaft bearings.
4. Check that on yokes and covers of bearings there is a marking. Covers of bearings are numbered by figures from 1 to 6 from a camshaft asterisk, and numbers on covers of bearings are located from a final collector. Similar marking is also applied on a head of the block of cylinders under the camshaft.
5. Evenly and gradually in the diagonal sequence weaken bolts of fastening of covers of bearings of the camshaft. As soon as pressure of a valvate spring stops, unscrew bolts completely. When unscrewing bolts note an arrangement of arms of a tube of a spray of engine oil.
6. Uncover camshaft bearings together with the yokes fixed on them. Covers of bearings of the camshaft are established on the directing pins.
7. Remove the camshaft. In the presence remove the washer of adjustment of an axial side play of the camshaft located near the forward bearing.