10.13.10. Additional air device

10.13.10.1. Removal

Six-cylinder engines

Arrangement of bolts of fastening of the regulator of turns of idling

 

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. The regulator of turns of idling is installed over an inlet collector in front of the fuel distributor.
3. Disconnect the electric socket from the executive mechanism.
4. Mark and disconnect air hoses from the executive mechanism.
5. Unscrew bolts and remove the executive mechanism (see the drawing).

Four-cylinder engines

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. The additional air device is installed in a back part of an inlet collector at a partition of a motor compartment.
3. Disconnect the electric socket from the executive mechanism.
4. Weaken a collar and remove an air hose from the top part of the additional air device.
5. Unscrew bolts and remove the additional air device.