Mercedes-Benz E-class W124 - Repair manual and operation
1. Maintenance (petrol engines)
2. Maintenance (diesel engines)
3. Repair of the 4-cylinder petrol engine installed in the car
4. Repair of 6-cylinder petrol SOHC engines
5. Repair of 6-cylinder petrol DOHC engines
6. Repair of the diesel engine installed in the car
7. Capital repairs of engines
8. Cooling systems, heating and ventilation
9. Fuel system with the carburetor
10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
10.1. Technical characteristic
10.2. General information
10.3. Accelerator cable
10.4. Air filter
10.5. Casing of the air filter
10.6. Fuel filter
10.7. Pressure accumulator
10.8. Fuel level sensor
10.9. Fuel pump
10:10. Fuel tank
10:11. Throttle case
10:12. Inlet collector
10:13. Elements of system of injection of KE-JETRONIC fuel
10.13.1. Fuel distributor
10.13.2. Air stream sensor
10.13.3. The air pump (models with 6-cylinder engines)
10.13.4. Valve of cold start of the engine
10.13.5. Sensor of temperature of cooling liquid
10.13.6. Switch of provision of a butterfly valve
10.13.7. Electronic control device (ECU)
10.13.8. Fuel nozzles
10.13.9. Pressure regulator
10.13.10. Additional air device
10.13.11. Lambda sensor
10:14. Removal of pressure in fuel system
10:15. Adjustment of turns of idling and maintenance WITH in exhaust gases
11. System of injection of BOSCH HFM fuel
12. Fuel system of diesel engines
13. Fuel system of diesel engines
14. System of start and charging
15. System of ignition of 4-cylinder petrol engines
16. System of ignition of 4-cylinder petrol engines
17. System of prestarting heating of diesel engines
18. Coupling
19. Mechanical transmission
20. Automatic transmission
21. Main reverse gear, driving and cardan shaft
22. Brake system
23. Suspension bracket and steering
24. Body
25. Electric equipment
26. Definition of malfunctions
27. Governing bodies and control devices
10.13.3. The air pump (models with 6-cylinder engines)
Removal
PERFORMANCE ORDER
1.
Remove a weight wire from the accumulator.
2.
Weaken a tension of an auxiliary driving belt and take off a belt from a pulley of the air pump.
3.
Disconnect the electric socket from the electromagnetic coupling.
4.
Weaken a collar and remove an air hose from a back part of the pump.
5.
Unscrew the top and lower bolts of fastening of the pump and remove the pump.
Installation
PERFORMANCE ORDER
1.
Installation is made in the sequence, the return to removal. Establish and adjust a tension of an auxiliary driving belt.