10.13.1. Fuel distributor

Removal

Arrangement of elements of fuel system on the 6-cylinder engine (4-cylinder is similar)
 A – accelerator cable;
B – air stream sensor;
C – fuel distributor;
D – fuel pressure regulator;
E – regulator of turns of idling;
F – valve of start of the cold engine;

Elements of the distributor of fuel and the sensor of a stream of air on the 4-cylinder engine
1 – fuel distributor;

2 – sealing ring;

3 – screws

Arrangement of screws of fastening of the sensor of a stream of air to the fuel distributor on the 6-cylinder engine

PERFORMANCE ORDER
1. Take off pressure in fuel system.
2. Remove a weight wire from the accumulator.
3. Remove the air filter (see rice. An arrangement of elements of fuel system on the 6-cylinder engine).
4. Holding fuel nozzles a wrench from a provorachivaniye, unscrew fuel farewell from fuel nozzles, then unscrew tolpivoprovoda from the fuel distributor (see rice. Elements of the distributor of fuel and the sensor of a stream of air on the 4-cylinder engine, the Arrangement of screws of fastening of the sensor of a stream of air to the fuel distributor on the 6-cylinder engine).
5. On the distributor of fuel unscrew fastening of fuel-supply lines, the valve of start of the cold engine, regulator of pressure and the giving fuel-supply line.
6. Disconnect the multicontact electric socket on a plait of wires of the electrohydraulic regulator of pressure located sideways the fuel distributor.
7. Unscrew three screws of fastening of the distributor of fuel and, being careful and turning it in the parties, remove it from the air stream sensor. Remove a sealing ring.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. At installation of the distributor of fuel use a new sealing ring.
2. Start the engine and check for lack of leaks around the removed components. Check and, if necessary, adjust turns of idling and maintenance WITH in exhaust gases.