Mercedes-Benz:: E-class W124:: Connecting earring of the stabilizer of cross stability

1. Maintenance (petrol engines)
2. Maintenance (diesel engines)
3. Repair of the 4-cylinder petrol engine installed in the car
4. Repair of 6-cylinder petrol SOHC engines
5. Repair of 6-cylinder petrol DOHC engines
6. Repair of the diesel engine installed in the car
7. Capital repairs of engines
8. Cooling systems, heating and ventilation
9. Fuel system with the carburetor
10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
11. System of injection of BOSCH HFM fuel
12. Fuel system of diesel engines
13. Fuel system of diesel engines
14. System of start and charging
15. System of ignition of 4-cylinder petrol engines
16. System of ignition of 4-cylinder petrol engines
17. System of prestarting heating of diesel engines
18. Coupling
19. Mechanical transmission
20. Automatic transmission
21. Main reverse gear, driving and cardan shaft
22. Brake system
23. Suspension bracket and steering
- 23.1. Technical characteristic
- 23.2. General information
- 23.3. Bearing of a forward nave
- 23.4. Nave of a forward wheel
- 23.5. Rotary fist
- 23.6. Shock-absorber of a forward suspension bracket
- 23.7. Spring of a forward suspension bracket
- 23.8. Lower lever of a forward suspension bracket
- 23.9. Forward stabilizer of cross stability
- 23:10. Fastener of a back nave
- 23:11. Replacement of the bearing of a back nave
- 23:12. Shock-absorber of a back suspension bracket
- 23:13. Spring of a back suspension bracket
- 23:14. Levers of a back suspension bracket
- 23:15. Lower lever of a back suspension bracket
- 23:16. Stabilizer of cross stability of a back suspension bracket
- 23:17. Connecting earring of the stabilizer of cross stability
- 23:18. System of the self-leveled back suspension bracket on the Station wagon models
- 23:19. Elements of the self-leveled back suspension bracket
- 23:20. Steering wheel
- 23:21. Steering column
- 23:22. Lock of a steering column / lock of ignition
- 23:23. Contact group of the lock of ignition
- 23:24. Rubber coupling of a steering shaft
- 23:25. Steering transfer
- 23:26. Bipod of steering transfer
- 23:27. Replacement of the lower sealing ring of steering transfer
- 23:28. Pump of the amplifier of steering
- 23:29. Pumping of system of the amplifier of steering
- 23:30. Steering shock-absorber
- 23:31. Central steering draft
- 23:32. Intermediate lever of steering
- 23:34. Cross steering draft
- 23:35. Angles of installation of wheels
- 23:36. Angles of installation of wheels
24. Body
25. Electric equipment
26. Definition of malfunctions
27. Governing bodies and control devices

23:17. Connecting earring of the stabilizer of cross stability

Prevention

At installation it is necessary to use new nuts of fastening of a connecting earring of the stabilizer of cross stability of a back suspension bracket.

Removal

PERFORMANCE ORDER

1. Lift a back part of the car and record on supports. Remove the corresponding back wheel.

2. Unscrew screws and remove the protection cover from the basis of the lower lever of a back suspension bracket.

3. Unscrew a nut, the fixing connecting earring to the stabilizer of cross stability.

4. Unscrew a nut and take a nut, the fixing connecting earring to the lower lever of a back suspension bracket, and take off an earring. Check a condition of a connecting earring and, if necessary, replace it.

Installation

PERFORMANCE ORDER

1. Establish a connecting earring into place and insert the lower bolt of its fastening.

2. Install the top part of a connecting earring on the stabilizer of cross stability and screw a new nut, having tightened it the required moment. Screw a new nut on a bolt of the lower fastening of a connecting earring and tighten it the required moment.

3. Install the protection cover on the basis of the lower lever and screw it screws.

4. Establish a wheel, then lower the car on the earth and tighten fastening bolts the required moment.