23:32. Intermediate lever of steering

Removal

Fastening of the intermediate lever

1 – hinged bolt;

2 – intermediate lever;

3 – laying;

4 – washer;

5 – plug;

6 – hinge case;

7 – thermofilter;

8 – cross steering draft;

9 – central steering draft


PERFORMANCE ORDER
1. Tighten the parking brake, then lift a forward part of the car and record on supports.
2. Unscrew nuts, the fixing spherical hinges of the central and cross steering thirst for the intermediate lever. For removal of spherical hinges of steering drafts from the intermediate lever use a stripper (see the drawing).
3. Unscrew a bolt and remove the thermofilter.
4. Unscrew a nut from a hinged bolt of the intermediate lever and remove a washer. Take a hinged bolt, then remove the intermediate lever together with laying from the hinge case.
5. Check a condition of the intermediate lever for existence of damages and, if necessary, replace it. Check a condition of plugs of the hinge of the intermediate lever for existence of wear and damages and, if necessary, replace them. Replacement of plugs can be made in house conditions for what beat out old plugs from the hinge case, and then establish new with application of a nut and bolt with big washers. Before installation of the plug moisten with soap water.

Installation

PERFORMANCE ORDER
1. Establish laying on the top part of the hinge of the intermediate lever, then install the intermediate lever and insert a hinged bolt. Establish a washer on a hinged bolt and screw a new nut, having tightened it by the required effort.
2. Clear pins of spherical hinges of steering drafts, then establish them in openings of the intermediate lever. Fix spherical hinges by new nuts, having tightened them the required moment. Lower the car.